Descripción
ENVIAR EMAIL
Fork Mounted Load Push
- Possibility to convert a conventional fork lift truck into a specially equipped machine to handle loads on slip sheet.
- Converting time: one minute.
- The driver enters the forks under the platens, tilt the mast forward, lift the carriage up, engage the upper hooks, lock the lower mounting hooks in place and connect the quick change hydraulic couplers.
- Different from the push/pull model, because it is without the gripper jaw. The plattens have to be directly slipped under the load.
- Maximum visibility.
- High tensile steel platens
- Quick and easily mounts over truck forks.
- Proven, dependable push linkage – tilting push plate standard.
Technical Data
Easy Rider Load-Push
LZ16A6X | 1600 | 600 | 380×1220 | 860 | 1000X1010 | 195 | 855 | 235 | 300 | 310 |
LZ16B6X | 1600 | 600 | 380×1220 | 994 | 1000X1010 | 195 | 855 | 235 | 300 | 310 |
LZ20A6X | 2000 | 600 | 380×1220 | 860 | 1000X1010 | 195 | 855 | 240 | 305 | 320 |
LZ20B6X | 2000 | 600 | 380×1220 | 994 | 1000X1010 | 195 | 855 | 240 | 305 | 320 |
Pressure relief valve
adjustable bolt-on platens, to fit two different overall widths.
Important: Easy Rider must be hooked on the carriage and supported by forks of suitable capacity
Más información sobre este producto consulte en: http://www.bolzoni-auramo.com/Lift-Truck-Attachments/Brudi-push-pulls/Fork-Mounted-Load-Push/index.aspx?m=124&idc=59