Descripción
ENVIAR EMAIL
- Hydraulically pressure-balanced design ensures seal integrity during system upsets.
- Unitized finger springs are non-clogging and provide positive drive to the stationary seal face.
- The Type 3710 eliminates the need to dismantle any piece of equipment, large or small.
- Its fully split design can be installed in less than 30 minutes, either on the packing sleeve or directly on the shaft.
Parameters
Temperature Limits |
250°F/121°C |
---|---|
Pressure Limits |
Vacuum to 200 psi(g)/13.7 bar(g) |
Speed Limits |
Up to 62mm/2.500": 3600 rpm Between 62mm/2.500" and 135mm/5.250": 1800 rpm Over 135mm/5.250": 900 rpm |
Más información sobre este producto consulte en: https://www.johncrane.com/products/mechanical-seals/split-seals/type-3710