Descripción
ENVIAR EMAIL
Producto
Metallic-/-Superalloys-Industries
Imagen de la página
Contenido de la página
Produced by reduction of Pure Molybdic Oxide with hydrogen.
Common uses: Initial material for the manufacturing of all powder-metallurgical sintered material as molybdenum rods, molybdenum sheets, molybdenum foils and molybdenum wires.Produced in following facilities: Chemiemetall.
Chemical Specifications
| Mo content(*): | 99,95% | min. |
| O: | 1.000 ppm | max. |
| C: | 50 ppm | max. |
| Al: | 20 ppm | max. |
| Ca: | 10 ppm | max. |
| Co: | 10 ppm | max. |
| Cr: | 10 ppm | max. |
| Cu: | 10 ppm | max. |
| Fe: | 20 ppm | max. |
| K: | 40 ppm | max. |
| Mg: | 10 ppm | max. |
| Mn: | 10 ppm | max. |
| Na: | 20 ppm | max. |
| Ni: | 5 ppm | max. |
| Pb: | 20 ppm | max. |
| Si: | 35 ppm | max. |
| W: | 150 ppm | max. |
(*)Excluding gas content.
Physical Properties
| Particle size | < 45 µm< 63 µm< 75 µm< 160 µm |
| Fisher S.S. | 3,4 – 5,2 µm |
| Scott Density | 1,1 – 1,7 g/cm3 |
Más información sobre este producto consulte en: http://www.molymet.cl/en/Productos/Paginas/Molybdenum-Metal-Powder.aspx
