Descripción
ENVIAR EMAIL
DDS Natural Bone Ash
Low weight loss up to 1480 oC ( 2700 oF ) Uniform, free of runs, drips, blothes and teardropsGood adhesion to metalPrevents mold erosion Available as powderEasy mixing with waterEasy to wash off Applicable by spray gun or brush
Typical Chemical Analysis | |
---|---|
CaO | 54 % |
P2O5 | 41 % |
MgO | 1.2 % |
CO2 | 0.40% |
Fe2O3 | 0.08% |
S | 0.16% |
SiO2 free | 0.36% |
SiO2 total | 0.44% |
Typical Physical Analysis | |
---|---|
Apparent density | 1.2 g/cc |
Specific Gravity | 2.7 g/cc |
Ignition losses | 0.80% |
Screen | 95% through mesh 325 |
- Use Instructions
- Quality Control
- Safety Information
- Packaging
Density required for casting copper anodes | ||
---|---|---|
EXTRAMOULD | 8 to 12 Bé | 1.058 to 1.090 gr/cc |
MOULDEX | 3.5 to 5 Bé | 1.024 to 1.035 gr/cc |
The application of Suinco Mould Coatings on the mold surface can be done manually or automatically.
Más información sobre este producto consulte en: http://www.suinco.cl/html/copper_coatings_dds.html