Descripción
Producto y solución industrial
1150W Water-Cooled Motors
Consulta información técnica, comercial y disponibilidad de esta solución de Ge Mining.
Información del productoConsulta técnica y comercial
EmpresaGe Mining
ModalidadSolicitud de información
Revisión29 de Septiembre de 2020
01
Información sobre 1150W Water-Cooled Motors | Ge Mining
ENVIAR EMAIL
- 6-pole stator with “form-wound” windings
- Copper chromium alloy rotor bars
- Class H insulation, robotically taped, Mica-Kapton system
- Single or double shaft extensions, high-strength 4130 alloy shaft on drive end
- Insulated bearing on non-drive end
- Stainless steel main terminal box is IP56 (Ex e) with bus bar connections for main cable terminations. Terminal box can be specified to be mounted on left “A” side or right “B” side of motor as viewed from non-drive end of motor. Available in standard, half (as shown above), or compact
- RTD and heater leads exit the lower window of the frame. The leads can either be terminated in an Ex e Auxiliary box or routed to a remote Auxiliary box
- Six (6) RTDs, 100 ohm platinum, two per phase embedded in stator slots
- Cooling System requires 33 gpm at maximum 38°C fresh water cooling (up to 50/50 freshwater/glycol mix), which is split between stator and rotor, 22GPM and 11 gpm respectively, 100psi maximum operating pressure*.
- Ambient temperature 55°C
- Tape Heater, 200W total
- Motor enclosure: Ingress Protection (IP56)
- Certifications:
Más información sobre este producto consulte en: http://www.getransportation.com/content/water-cooled-motors-0
02
Servicios y capacidades
Consulta disponibilidad, configuración, dimensiones, compatibilidad, capacidad, transporte, montaje y condiciones comerciales directamente dentro de IndustriaMinera.cl.
Producto consultado: 1150W Water-Cooled Motors
Empresa: Ge Mining
Ir al formulario de contactoEmpresa: Ge Mining
03
Otros productos de Ge Mining
04
Formulario de Contacto
* Solicita información referida a 1150W Water-Cooled Motors a Ge Mining.
