Descripción
ENVIAR EMAIL
With cut edges maximum width is 20 mm less. Coil weight 3.5 – 20 tonnes. Sheet length 750 – 6000 mm.
Thickness mm |
Width mm |
0.50 – 0.79 | 1000 – 1280 |
0.80 – 1.19 | 1000 – 1410 |
1.20 – 2.50 | 1000 – 1530 |
2.51 – 3.00 | 1000 – 1280 |
Our service centres also provide other sheet and strip lengths, as well as processing options.
Tolerances
The tolerances of cold-rolled sheet steel products manufactured by Ruukki are in accordance with EN 10131:2006. Products are delivered with the normal tolerances. Special tolerances are agreed on separately at the time of order.
Surface quality & finish
Surface quality: Minor surface defects and slight colouring are permitted for the COR-TEN A steel.
Yield strengthRe MPa | Tensile strengthRm MPa | ElongationA80 % | |
COR-TEN A | 310 | 450 | 22 |
Content % | ||||||||||
C | Si | Mn | P | S | Cr | Cu | Ni | Al | ||
COR-TEN A | Minimum | 0.25 | 0.20 | 0.07 | 0.50 | 0.25 | 0.015 | |||
Maximum | 0.12 | 0.75 | 0.50 | 0.15 | 0.03 | 1.25 | 0.55 | 0.65 | 0.060 |
- Background and advice in choosing welding parameters
- Recommended welding parameters for both cold-rolled un-coated sheets and metal coated sheets
Más información sobre este producto consulte en: http://www.ruukki.com/Steel/Cold-rolled-steels/Cold-rolled-weather-resistant-COR-TEN-A