Descripción
ENVIAR EMAIL
Fork mounted push pull
- Possibility to convert a conventional fork lift truck into a specially equipped
- machine to handle loads on slip sheet.
- Converting time: one minute.
- The driver enters the forks under the platens, tilt the mast forward, lift the
- carriage up, engage the upper hooks, lock the lower mounting hooks in
- place and connect the quick change hydraulic couplers.
- The sheet gripper jaw is operated by a sequence valve.
- Maximum visibility.
- High tensile steel platens.
- Quick and easily mounts over truck forks.
- Proven, dependable push linkage – tilting push plate standard.
Technical Data
Easy Rider
TZ16A6X | 1600 | 600 | 380×1220 | 860 | 1000X1010 | 195 | 855 | 240 | 295 | 350 |
TZ16B6X | 1600 | 600 | 380×1220 | 994 | 1000X1010 | 195 | 855 | 240 | 295 | 350 |
TZ20A6X | 2000 | 600 | 380×1220 | 860 | 1000X1010 | 195 | 855 | 245 | 300 | 360 |
TZ20B6X | 2000 | 600 | 380×1220 | 994 | 1000X1010 | 195 | 855 | 245 | 300 | 360 |
Pressure relief valve
Adjustable bolt-on platens, to fit two different overall widths
Important: Easy Rider must be hooked on the carriage and supported by forks of suitable capacity.
Más información sobre este producto consulte en: http://www.bolzoni-auramo.com/Lift-Truck-Attachments/Brudi-push-pulls/Fork-Mounted/Fork-Mounted/index.aspx?m=124&f=2&idv=1&idc=58&id=39